Before first time use
1. Remove all packing materials and make sure the power plug is not connected.
2. Thoroughly clean the blending bottle, blades, top of blade assembly, drinking lid, blending jar and blending jar lid with nonabrasive sponge and neutral detergent, and dry it with a soft cloth. Notice: The bottom side of blade assembly must be completely dry, that is to avoid liquid inflow the main body and makes damages.
3. Use a damp cloth to wipe the main body outer case, then wipe it with a soft dry cloth.
4. After the appliance, parts and accessories are thoroughly dry, it is ready to use.
Use
Warning: Do not blend over 60 seconds continuously ever time, rest for 2 mins after one-time complete blending. Stop and rest for 30-45 mins after 5 times blending to avoid motor and appliance overheat.
• Do not put too much fruit to blend, never put the fruit over MAX indication line on blending bottle, or 800ml indication line on blending jar.
• This appliance can only use for fruit blending, never blend sugarcane, soybean, coffee bean, cinnamon, nuts and meat.
• Cut the fruit into small pieces (around 2x2x2cm) and take out the seeds to achieve a better blending result and reduce jamming opportunity.
• Do not blend ice cube only, it may jam the blade easily.
• In case of over use, overheat protection device will triggered and cut off the power of the appliance automatically. Please unplug from power supply socket immediately and let the appliance cool down for 30-45 mins, then try to operate again.
How to use blending bottle
1. Put the main body on a flat surface.
2. Screw off the lid, place the blending bottle on flat surface with open end facing up (Fig 1). Fill the blending bottle with your favorite ingredient (Fig
2). Add water or milk into the blending bottle (Fig 3).
Notice: Never add ingredient and liquid that pass the MAX marking on
blending bottle.
Tips: To make smoothie, please add the fruit and ice cube little by little, this can
avoid ice jam the blades.
1. Fasten the blade assembly on the open end of blending bottle (Fig 4).
2. Turn the blending bottle upside down, line up the arrows on the blade assembly to the open lock pattern on the main body, and place the blending bottle in the main body, then turn the blending bottle clockwise toward lock pattern to lock them with main body (Fig 5).
Notice: The bottom side of blade assembly must be completely dry, that is to avoid liquid inflow the main body and makes damages.
3. Connect the power plug to power supply socket. All the lights flashing indicate that the appliance is ready to use.
4. According to your needs, choose one of the switch buttons and press it, appliance then start blending (Fig 6).
- SOFT blending program: Best to blend soft fruits (e.g Strawberry, tomato), complete blending time is 40s.
- HARD blending program: Best to blend hard fruits (e.g Carrot) and ice cube, complete blending time is 60s.
When blending, the stage lights will light on one after other, to indicate the different program stages.
During blending, you can press any switch button to stop blending.
When blending finish, all the stage lights light on and the switch button indication lights keep flashing.
Notice: Do not leave the appliance continuously operating for more than 1 mins. Before restarting, let it cool down for at least 2 mins.
5. Unplug from power supply socket. Turn the blending bottle anticlockwise toward open lock pattern, then take out the blending bottle, place it on a flat surface (Fig 7).
6. Hold the blade assembly and turn it anticlockwise to take it out from blending bottle (Fig 8). If you are using blending bottle, pour out the drink, or fasten the drinking lid to take it outside. To fasten the lid, turn it clockwise; to take it out, turn it anticlockwise.
Tips: If the blade assembly is too tight to take out, you can wear a dish washing hand gloves to open it. To use drinking lid, turn the drinking lid anticlockwise to open it to drink. To close it, turn the drink lid clockwise. Tips: The blending bottle with drinking lid can be used as a sport water bottle.
How to use blending jar
1. Put the main body on a flat surface.
2. Fasten the blade assembly on the open end of the blending jar (Fig 1). Line up arrows on the blade assembly to the arrows on the base and place the blending jar in the base. To lock the blending jar in the base, simply turn the blending jar clockwise in the base (Fig 2). Add water or milk into the blending jar (Fig 3).
Notice: Never add ingredient and liquid that pass the MAX marking on
blending jar.
Tips: To make smoothie, please add the fruit and ice cube little by little, this can avoid ice jam the blades.
1. Cover the blending jar lid (Fig 4).
Notice: The bottom side of blade assembly must be completely dry, that is to avoid liquid inflow the main body and makes damages.
2. Connect the power plug to power supply socket. All the lights flashing indicate that the appliance is ready to use.
3. According to your needs, choose one of the switch buttons and press it, appliance then start blending (Fig 5).
- SOFT blending program: Best to blend soft fruits (e.g Strawberry, tomato), complete blending time is 40s.
- HARD blending program: Best to blend hard fruits (e.g Carrot) and ice cube, complete blending time is 60s.
When blending, the stage lights will light on one after other, to indicate the different program stages.
During blending, you can press any switch button to stop blending.
When blending finish, all the stage lights light on and the switch button indication lights keep flashing.
Notice: Do not leave the appliance continuously operating for more than 1
mins. Before restarting, let it cool down for at least 2 mins.
4. Unplug from power supply socket. Turn the blending bottle anticlockwise toward open lock pattern, then take out the blending jar, and open the blending jar lid, pour the juice into the bottle, enjoy drinking (Fig 6).
