To switch on the appliance, turn the knob to “ON” position. The “ON” light will
be illuminated. To control the rotary speed, turn the knob at between “MIN” &
“MAX” position.
CONTROL PANEL
1. ON/ OFF switch
2. Speed control (MIN -> MAX)
3. Pulse/Auto clean button
PULSE/AUTO CLEAN BUTTON
This function is only working when blender is already running. When blender is
running, button is pushed to get blender quickly up to full speed. When button
is released, blender gets down to pre-set speed again. This function is suitable
for ice crushing or cleaning.
Warning: Do not add more than than 8pcs ice cubes (less than 20 x 20 x 20mm
size of the ice) in glass jar at a time
HOW TO USE THE GLASS JAR
1. Place the ingredients in the glass jar.
2. Place the lid on the jar and close it tightly.
3. Insert the measuring cup into the lid opening.
4. Select the speed by turning the control knob or press the Quick-select button.
Note: Do not let the appliance to operate more than 2 minutes continuously.
Let the appliance to cool down to room temperature before continue operating
the appliance.
Note that the glass jar can only withstand temperatures up to 60° C.
AFTER USING THE BLENDER
1. Disconnect the power from main supply.
2. Remove the lid (together with measuring cup) from the jar.
3. Remove the jar (together with blade assembly unit interface) from the motor
part.
Note: Always clean the removable parts immediately after use.
Note: It is recommended to cut the meat or other food into smaller pieces
before putting them in the jar. Do not operate with large quantities of food at
one time.