HEAT RESISTANT SILICON PAD
Sudden rise in temperature might affect the accuracy of the scale. We therefore recommend using the heat resistant silicon pad for optimum accuracy during brewing and measurements of hot liquid. The pad is also intended to be used to protect the scale during measurements and as a support when measuring directly into a portafilter.
FULL DISPLAY LAYOUT
TURN ON SCALE
• Make sure the power switch on the back is set to on position.
• Then short press the power button on the display to turn the scale on.
• The timer and scale button fades in, and the scale is ready to use.
TARE FUNCTION
• The scale tares automatically when it starts.
• Place the coffee container on top of the scale, press the scale button to tare the weight of the container, and the scale will show 0.0g/oz. The scale is now ready to measure any additional weight.
• Remember to use the heat resistant silicone pad if you are brewing or weighing any hot liquids.
CHANGE WEIGHT UNIT
Long press the scale button for 3 seconds to switch between grams (g) and ounces (oz).
TIMER
• The timer does not show when starting the scale. Short press the clockbutton to show the timer.
• Short press the clock-button again to start the timer. To pause the timer, short press the clock-button and the time will freeze.
• To reset the timer long press the button for 1 second.
AUTO OFF
If you stop adding weight to the scale, it will automatically shut off after 10 minutes.
TROUBLESHOOTING THE SCALE
OVERLOAD WARNING
The scale is overloaded, remove weight from the scale (maximum weight is 2000g).
UNSTABLE WARNING
Unable to activate the scale because the scale is unstable. Place the scale on a flat and level surface.
BATTERY STATUS
• If the battery is 10% or lower when the user is turning on the scale this warning shows on the display. The warning is visible for 2 seconds before the scale turns on.
• To show battery status, long press the on/off button for three seconds, and the battery percent will show before the scale turns on/off.
CHARGING THE SCALE
To charge the scale, plug the USB-C cable into the USB port located at the back of the scale. Make sure the power switch on the back is set to on position before charging the device. When charging, the display only shows the battery percent.
CLEANING AND STORING THE SCALE
Clean the scale with a soft slightly damp cloth. Never use hot water or any harsh chemicals.
STORAGE
• Turn the power switch off.
• Ensure that there is nothing on the scale when it is not being used.
• The scale should not be stored standing on its side
• Never attempt to open the scale and tamper with its mechanism or circuitry.
BLUETOOTH CONNECTION
The scale comes with a built in Bluetooth® device. This feature gives the user the possibility to read and control the scale from a smartphone device (iOS or Android). If a Bluetooth connection is made, the B lights up on the display.
Follow these steps to connect your smartphone to the scale.
• Download the “Wilfa SVART” app from App Store® or Google Play™.
• Turn on the scale by pressing the power button
• Open the app on your smartphone device and click on the Bluetooth icon in the upper right corner.
• Select the “Wilfa SVART scale” and press connect.
TIPS AND TRICKS
• This scale can be used as a lid for the Uniform coffee grinder.
• Short pressing the power button taring the scale and zeros the timer at the same time.