PLACEMENT
• Place the product on firm, flat surface. The humidifier should be placed on flathorizontal surface and keep it steady.
• Do not place the product near or close to any heat sources. The humidifiershould be far away from any heat sources, such as stoves or fire places. Do notexpose the product to direct sunlight.
• Do not place the product near or close to furniture or electric appliances. Themist outlet from the humidifier should not be directed towards furniture andthe electronic appliances, to avoid damage. Particles in water, such as calcium,can be part of the vapour and be deposited on objects in the vicinity.
• It is recommended that the unit be placed on a table or other surface atleast 70 cm above the floor level, to ensure that the vapour will be optimallydistributed throughout the room.
• Air draft and temperature changes can impact the distribution of thevapor. To avoid water damage it’s recommended to always check for moistaccumulations on the floor or other nearby surfaces
FUNCTION AND FEATURES
• Adjustable mist output by knob, easy operation
• With aroma diffuser function
• Big tank cover design for easy cleaning by hand
• Automatic shut-off protection with warning when waterless
• Automatic shut-off protection when take off the water tank
• Optional demineralization cartridge to prolong useful life.
• Integrated body design for noise suppression, super quiet when operating
• Ceramic glass glaze transducer can resist water scale effectively to prolonguseful life.
OPERATION INSTRUCTION
OPERATION CONDITION
• The working environment for humidifier is in temperatures between 5˚C to45˚C, with a relative humidity level below than 80% RH.
• Set the machine to operate on low mist level when room relative humidity ishigher than 70% or in an enclosed room space.
• Use fresh water with a temperature that not exceed 40 ˚C.
• Clean water tank and water flume when taking the product into use after along time.
OPERATION STEPS
1. Unmount the tank from the base, unscrew the water tank cover and fill thetank with water, screw the water tank cover back, make sure it sits tightly.
Replace the water tank on the base.
2. Check that the mist outlet nozzle is correctly mounted on the water tank.
3. Plug in the power; turn the knob clock wise to start the machine. Adjustpreferred mist output from minimum to maximum by turning the knobclockwise. To decrease the output or turn off the machine please turn theknob counter clockwise.
4. When the water level is too low the indicating light turns red and the machine will stop work. Refill the tank and turn on the machine to continue operate.
5. The machine will stop work if the water tank is removed during operation.
6. The machine will resume operation when the water tank is replaced correctly