MAINTENANCE
If the water is hard, meaning that the water contains too much calcium and magnesium, it can cause a “white powder” problem and leave heavy scales on the surface of water basin, transducer, and inner surface of the water tank. Scales on the surface of transducer will let the humidifier work improperly.
Use cold boiled water or distilled water.
Empty the tank and refill every third day. Before refilling, clean it with fresh tap water. Remove any scale, deposits, or film that has formed on the sides of the tank or on interior surfaces and wipe all surfaces dry.
Empty and clean the humidifier before storage. Make sure all parts are died completely. Clean the humidifier before next use.
HOW TO CLEAN THE TRANSDUCER
• Clean with clean water of citric acid if there is scale on it.
• Brush off the scale from the surface.
• Rinse the transducer with clean water.
HOW TO CLEAN THE BASIN
• Clean the water basin with a soft cloth or use citric acid if there is scale on it.
• If the scale covers the water valve, drop some citric acid on it and let it sit for 2-5 minutes on the scale and clean it with a brush.
• Rinse the water tank with clean water.
HOW TO CLEAN THE CERAMIC FILTER
• Clean and activate the ceramic filter after using 1000L water. Depending on the water quality. If the ceramic filter is dirty it needs to be cleaned more frequently.
• It can be dipped into vinegar for 5 minutes, then rinse it with water.
• Put the filter under the sun for 4-6 hours to dry