1. Transparent lid
2. Ice collecting tray
3. Water tank
4. Control panel
5. Front Housing
6. Top Lid
7. Ice shovel board
8. Rear housing
9. Air vent
10. Ice scoop
CONTROL PANEL
ICE FULL: Ice full alarm indicator light
ADD WATER: Water shortage alarm indicator light
LARGE: Large ice indicator light
SMALL: Small ice indicator light
1. Plug in power cord, the machine is in standby mode, and the small ice indicator light flashes green. Press the START/PAUSE button, the indicator lights of small ice and large ice flash alternately. When the corresponding indicator lights up, press the START/PAUSE button again to choose size, and the machine starts to work. The corresponding indicator lights up for a long time, and the ice cube production starts.
2. CLEANING FUNCTION: Plug in power cord, press the START/PAUSE button to start the machine, and then press the START/PAUSE button for 2 seconds. The machine enters the cleaning function, and the four lights flash alternately. Do not disconnect the power supply during cleaning. After cleaning, the machine will automatically enter the standby mode.
3. ADD WATER: When the “Add water” indicator light is on, it means that the water tank is empty. Add water and press the START/PAUSE button to restart the machine.
4. ICE FULL: When the ice reaches the maximum amount of ice storage container, the ICE FULL indicator light is on and the machine stops. Remove the ice cubes. When the ice position is lower than the full sensor position, the machine will restart automatically.