ASSEMBLING AND HOW TO USE
1. Insert the removable bowl in the machine.
2. Place the mixing blade into the removable bowl and make sure that the motor shaft fits with the blade (see the picture below).
3. Fit the transparent lid on top of the bowl and twist until it locks into position.
4. Place the refill lid on the transparent lid.
Starting the ice cream maker
Connect to the mains supply
Check the voltage to ensure that the voltage indicated on the rating plate matches the voltage where the product is being used.
Function buttons
POWER Button: After connecting to the mains supply, press the POWER button and the display will show “60:00”. This means that the default operating time is 60 minutes.
TIME+, TIME- Button: There are two buttons TIME+ and TIME- to adjust the time. Press the TIME+ or TIME- button and the time will increase or decrease in 1-minute increments. If you press and hold the TIME+ button, the time will increase rapidly, and if you press and hold the TIME- button, the time will decrease rapidly. You can choose different times according to your taste.
START/STOP Button: Once the time has been set, press the START/STOPbutton to start the ice cream process. You can press the START/STOP button during the process to check the mixing blade and ingredients (the compressor will still work).
Note: The pressing time of the START/STOP button can not exceed 3 seconds, otherwise the machine will enter initial default status. When the count-down ends, the operation automatically stops and you will hear the sound “di” 1 times and the display will show “60:00”. The display backlight flickers at 1 seconds speed.
Extended chilling function
When the ice cream is finished the machine will chill (no mixing) up to 1 hour. The machine will chill at 10-minute intervals.
Warning: Always remember to unplug the machine when you are finished.
Operating time
When the machine is running, the operating time is adjusted by pressing the TIME+ or TIME--button.
After the operating time has elapsed
When the set time (for example 60 minutes) has elapsed and the machine stops and returns to its original state, you can once again choose an operating time by pressing the TIME+ button, then press the START/STOP button again. The machine will continue to run for the selected time, then stop to switch to the extended chilling function.
Display
The display shows the elapsed time.
Freezing temperature in the upper right corner.
Freezing icon
Mixing icon
Both of these icons will be shown on the display during the ice cream process.
When the mixing process is stopped by pressing the START/STOP button or during the extended chilling function, only the freezing icon will be displayed.
Automatic stop if overloaded
When the ice cream becomes hard, the motor can slow down and stop. This is to prevent the motor short-circuiting.
Volume of the ingredients
To avoid the ice cream overflowing, make sure the ingredients do not exceed 60% of total capacity (maximum 0.9L). This is because the content expands around 40% when freezing.
Storing the ice cream
Move the finished ice cream to another container using a plastic or wooden spoon. Avoid sharp objects, as these can scratch the inside of the removable bowl.