USING THE SLOW JUICER
1. Once all parts are securely in place, connect the power cord to a power source.
2. Place the pulp container under the pulp ejector, and either a glass or the juice container under the juice spout.
3. The Slow Juicer has 3 settings (Figure 6)
a. [ON]- this starts the motor for juicing.
b. [OFF]- this stops operation.
c. [R]- this moves the Auger in the opposite direction.
4. Before placing ingredients in the Slow Juicer, make sure all foods have been thoroughly washed, if some ingredients have to be peeled, there is no need to wash. Also make sure to cut all foods into appropriate sizes so it easily fits into the Food Chute, we recommend no more than 7,5 cm long pieces. Please make sure to remove any hard seeds or pits, such as cherry or plum pits, as hard objects can lead to serious damage on the appliance.
5. When placing any ingredients in the Slow Juicer, the Auger will automatically pull in the food, and begin juicing immediately. DO NOT push, force, or overstuff the unit. The Pusher provided with the Slow Juicer is only to use when food obstructs the inside of the Food Chute.
6. It is best to insert all food at a slow pace, allowing all pulp to be extracted from the fruit or vegetable completely.
7. Reminder: turn off the Slow Juicer when juicing is complete. Do not run the Slow Juicer without any food inside the unit as this could overheat the motor.
8. The Slow Juicer has a unique cleaning process when switching between different types of juices. To clean, simply place one of the collectors under the juice spout and pour water though the Food Chute while the unit is on. This will rinse out most of the remaining residue from your last juicing. When the water from the slow juicer begins to run clear, that is an indication the unit is clean and ready to make a new juice recipe.
NOTE: This process is not an alternative to a complete cleaning of each disassembled part.
NOTE: Under the bowl, there is a silicone pad (Figure 7) that prevents juice from exiting through the pulp ejector. When using the Slow Juicer, make sure the silicone pad is firmly in place. When cleaning the chamber, make sure to slide the pad out and run water through the pulp ejector to remove excess food debris.
