Usage
1. Before usage, please make sure that the button switch is set to “0”.
This will avoid starting the main machine if assembly is not completed, thus avoiding unnecessary injury or damage to persons or property.
2. Before juicing, first make sure that the strainer is set in the correct position, with no direct contact between strainer and transparent cover.
Put on the transparent cover, secure the handle in the slot, and then turn on the machine.
3. In order to use, assemble according to the diagram in “Parts and contents”. Plug the cable into a wall socket, turn the switch on and let the machine run without load for 5 sec. Put prepared vegetable or fruit into the feeding chute and press gently down with the food pusher.
NOTE: When pressing food with the food pusher, force must be even or indirect.
Pressure must not be more than 1 kg and do not use sudden force as the juicing effect will be reduced.
Operating time
- This machine is designed with button switches marked O, I and II (O for stop, I for low power, II for high power).
- For juicing, select high power, operate for 1 min, stop for 1 min, then repeat.
- After the above operation has been performed three times, stop for 15 minutes. Do not operate until the motor is cooled, as in this way the service life of this machine will be prolonged.