WSFBS-200B Troubleshooting

Problem	Possible causes	Solution
Coffee grinder does not start	Power cord is not plugged in Bean hopper is not in correct position	Plug into power socket Rotate the bean hopper properly into locked position
Coffee grinder clogs	Using setting 1-4 might clog the burrs	Set grinder to 25 and gradually adjust back to the wanted setting while the motor is running with beans in the hopper. This will remove clogging of the burrs Depending on type of beans, wear and factory calibration the machine might clog at the finest settings To find the finest setting before clogging: Lower setting gradually until the burrs clog. If it clogs at setting 3 then setting 4 should be considered as finest setting
Coffe grinder grinds to coarse even at finest settings	Bean hopper not fully rotated in place	If the beans are grinded coarse even on the finer settings the head might not be in place. Try to rotate the bean hopper one more revolution
Its hard to adjust to finer settings	Grinded beans might stuck between the burrs	Let the motor run while adjusting to a finer setting

Your cart