CLEANING
1. Ensure the fan is switched off and unplugged before cleaning.
2. Clean the exterior surfaces of the fan using only a soft, damp cloth.
Note: Never immerse any part of the fan in water. Do not use gasoline, paint thinner, or other chemicals for cleaning purposes.
Note: The back guard is not removable for cleaning. Please use only a soft, damp cloth to gently wipe the surface of the back guard.
REMOVING THE FRONT GUARD
1. Use a “+” shape screwdriver to remove the single screw for the front guard to be removed. The screw hole is positioned on the back guard.
2. After removing the screw, slightly turn the front guard anticlockwise until the 2nd marking on the left of the first marking. You will feel the lock has been released.
3. Pull the front guard with fan blade out in front and remove it.
REASSEMBLY
• After the front guard and fan blade have been cleaned, ensure that both components are completely dry before reassembling them onto the fan.
Note: Ensure the appliance is fully and correctly assembled before switching it on again.
STORAGE
For storage, the fan may remain assembled and should be covered to protect it from dust. Store the fan in a dry location.