QUICK START GUIDE
1. Remove all packaging.
2. Place the fan on a dry, level surface.
3. Plug the fan directly into a wall socket.
4. Press the Power button to start (default speed 3).
5. Adjust speed and modes using the control panel or remote.
ON/OFF
• Press ON/OFF button, the fan will start at speed 3.
• Press the ON/OFF button again to turn off the fan.
• Next time you turn on the fan it will start with the same settings it was last turned off with, as long as it remains plugged in.
SPEED
There are 8 speed settings. Adjust the speed by pressing Speed Up or Speed Down buttons.
NATURAL WIND MODE
Activate Natural Wind mode, then adjust the fan speed using the speed buttons.
The airflow will cycle between two speeds:
• Speeds 1–2: Gentle breeze
• Speeds 3–4: Light
• Speeds 5–6: Moderate
• Speeds 7–8: Strong
TURBO MODE
Press the Turbo mode button to activate maximum wind speed. While Turbo Mode is on, the Speed Up and Speed Down buttons are disabled.
Note: Turbo mode operates for only 2–3 minutes at a time. For continuous strong wind, set the fan to the highest speed before activating turbo mode.
When it turns off the turbo mode setting, it returns to the previous setting.
OSCILLATION
The fan can move both side to side and up and down.
• Press the Oscillation button once to enable left-right movement.
• Press it a second time to enable up-down movement.
• Press it a third time to activate both directions at once.
3D oscillation, this will make it move in both directions at once, resulting in an organic movement moving air in all directions inside its designated area.
ON TIMER
When the fan is off, press the “on timer” button to schedule it to turn on in 1, 2, or 4 hours. When this time is reached, the fan will automatically start. You can also set the desired speed and oscillation settings for when the fan turns on. To change time or cancel your timer setting, press the On Timer button again until the display light indicates the new time or the light is off.
OFF TIMER
To select a shut-off time (1, 2, or 4 hours), press the “off timer” button. Pressing the button a fourth time will cancel the timer.
LIGHTS OFF
While the fan is running, the button lights will dim to 50% brightness after 15 seconds. Press any button to return the illumination to full brightness.
REMOTE CONTROL
All fan functions can be operated using the remote control and will function in the same way as using the buttons on the fan.
This fan’s remote uses a CR2032 coin battery.