Before cleaning, turn the functional knob anti clockwise until it points to “OFF” and disconnect the plug from the outlet.
WATER TANK INSIDE
Clean water tank inside and water sink twice per week at least when using the on a daily basis. Water residuals may form along the tank’s inside and can be removed with soft dish brush. A soft cloth can also be used to wipe the insides of the water tank. Don’t put acid, alkalescency, bleacher detergent into water tank to avoid damage.
WATER SINK INSIDE
The water quality in some regions can be rich of calcium (hard water). This can result in increased calcium deposits inside water tank or transducer. Users in areas with high content a minerals should perform maintenance as often as needed.
• Add cleaning agent on the transducer surface (The amount of detergent isdirectly dependent on the amount of calcium deposits).
• Fill water into the space that is located under the water tank placement (water sink). Let the machine rest for 10-15 min.
• Then gently brush the transducer area free of calcium deposits. Clean theentire sink area free of detergent and mineral deposits by using a dish brush.
• Rinse with fresh water and repeat at least two times. Don’t use acid detergents to wash the water sink inside to avoid damage on the transducer.
BODY AND WATER TANK OUTSIDE
Wipe it gently with a soft cloth mixed with a small amount of detergent.
STORAGE
Drain the water in tank and body, remove any stains or dirt. Make sure that the product has dried completely before it is put into storage. Store the product in a dry environment.