In case the water is hard (The water contains too much calcium and magnesium) it can cause a white powder residue and leave heavy scale buildup on the surface of water basin, PCB heater, transducer, and inner surface of the water tank.
• Empty and refill the water tank every three days.
• Clean the water tank and basin every three days.
• Before storing the humidifier, pour out all remaining water from the tank and the basin, clean and dry all components thoroughly. Clean the humidifier again before next use after storage.
HOW TO CLEAN THE TRANSDUCER AND HEATER
• Clean with clean water and citric acid if there is scale on it.
• Brush off the scale from the surface.
• Rinse with clean water.
HOW TO CLEAN THE WATER TANK
• Remove the water tank from the humidifier.
• If scale deposits are present, you can use citric acid:
• Apply a small amount of citric acid directly to the affected areas.
• Allow the solution to work for 2-5 minutes.
• Scrub the deposits with a soft brush.
• Rinse the water tank thoroughly with clean water.
HOW TO CLEAN THE BASIN
• Clean the water basin with clean water and a soft cloth.
• Use citric acid if there is scale in it.
HOW TO CLEAN THE CERAMIC FILTER
• Clean the ceramic filter after using 1000L water. Depending on the water quality. If the ceramic filter is dirty it needs to be cleaned more frequently.
• Make a mild water and vinegar solution with 15ml vinegar (1 tablespoon) and 600ml water.
• Place the ceramic filter in the solution for 1 hour, and rinse.
• Put the filter under the sun for 4-6 hours to dry, or dry overnight on the countertop.