For a better experience, buy the Wilfa espresso accessories on Wilfa.com.
CAPSULE
There are two sorts of capsules you can use with the adapters: Dolce gusto and Nespresso Original.
1. Choose your desired coffee capsule and place it into the correct adapter.
2. Lift the lever completely and insert the adapter. Close the lever.
3. Place a cup under the coffee dispenser.
4. Press the preferred coffee buttton.
GRINDER
| COFFEE TYPE | SIZE |
| Turkish | 0-1 |
| Espresso | 2-4 |
| Moka | 5-6 |
| Filter | 6-7 |
Make sure the bean hopper is filled with coffee beans. The bean hoppers capacity is 40g.
Adjust the grind size by turning the knob.
1. Use the espresso adapter and choose single or double basket. Place the dosing ring on the adapter.
2. Insert the adapter in the slot under the grinder and press the grind button.
3. When the grinder is finished, pull the adapter out and use the tamper to compress the coffee firmly into the cup.
4. Lift the lever and insert the adapter. Close the lever.
5. Place a cup under the coffee dispenser and press the preferred coffee button.
LATTE
Place the adapter with coffee of your choice (capsule or ground coffee) into the appliance.
Recommended coffee is ristretto or espresso.
1. Fill the milk container with milk up to the max line.
2. Press the latte button.
Latte Macchiato: Recommended proportions are 50ml coffee and 220ml milk.
STEAM WAND
1. Insert the wand into the slot. Make sure it is fully inserted, otherwise it may drop out during steaming.
2. Fill a milk jug with milk, put the tip of the steam wand into the milk.
3. Press the milk icon. It will preheat before it starts to steam.
4. Press the milk icon again to stop the frothing.
ENERGY SAVING
After 10 minutes of no activity, the unit goes into energy saving-mode.
PROGRAMMING QUANTITY
SET THE COFFEE VOLUME
The volume can be adjusted from 25-250ml.
1. Lift the lever and insert the adapter with the coffee of your choice.
2. Push and hold a coffee button until the desired volume is reached. Release the button.
The chosen amount is stored automatically.
When you press the same button, the cup size has been memorized.
SET MILK VOLUME
Use the milk container. Make sure it is correctly installed. We recommend that you fill the container with water, so you do not waste any milk.
1. Lift the lever and insert the adapter without coffee.
2. Push and hold the button (latte macchiato) util the desired milk volume is reached.
Release the button. The chosen volume is stored automatically.
The amount of milk is saved until the next time.
RESTORE FACTORY SETTINGS
If you want to restore the quantities to factory settings:
1. ress the on/off button. Wait until it is preheated.
2. Press espresso and lungo buttons at the same time for 5 seconds.
The machine makes 2 beeps and the beverages-icon on the display flash for 5 seconds, this indicates thatit is restored.
| TYPE OF COFFEE | QUANTITY |
| Espresso | 50ml |
| Lungo | 100ml |
| Latte Macchiato | 20ml (50ml coffee and 220ml milk) |