Remove all labels, tags and stickers attached to the appliance, cord or power
plug of the steamer.
• Read all the instructions carefully before use.
Fabric brush
• Ensure the brush and steamer are cool before attaching or removing the brush.
• To attach, gently fit the top of the brush (1) over the top of the steamer head,
then click the bottom of the brush into place (2).
• To remove, allow the steamer to cool. Gently pull on the tab (1).
|
Usage Suitable for garments that allow medium to high heat and steam. Helps remove lint, hair and pet hair |
Filling the water tank
1. Hold the handle for support and pull out the removable water tank with the other
hand.
2. Gently open the rubber cover at the top.
3. Using a clean measuring cup, pour approximately 100ml water into the water
tank. Securely close the rubber cover.
• If you live in an area with hard water, we recommend using distilled, demineralised
or filtered water.
• Do not use water with perfumes or scented additives.
4. Wipe off any excess water before placing the tank back into the steamer.
5. To refill during use:
• Turn the steamer off by pressing the power button, unplug from the socket,
and follow the steps above to refill the tank.
Tip: If the steamer fails to reheat after 45 seconds, prime the pump by holding the
steam trigger button until steam forms.
