Warning:
• Before cleaning, turn off the dehumidifier and disconnect power. Otherwise it may lead to electric shock.
• Do not wash the dehumidifier with water, or it may lead to electric shock.
• Do not use volatile liquid (such as thinner or gasoline) to clean dehumidifier.
Otherwise it will damage unit’s appearance.
1. Grille and Case
To clean the case:
When there is dust on the case, use soft towel to dust it off; When the case is very dirty (greasy), use mild detergent to clean it.
To clean the grille: Use a dust catcher or brush.
2. Air Filter
The air filter should be checked and cleaned at least every 250 hours of operation or more often if necessary.
To remove: Remove the bucket. Grasp the filter edge, and pull it straight down and out.
To clean: Clean the filter in water (max 45°C).
Rinse it and let the filterdry before replacing it.
Warning:
• Do not operate the dehumidifier without a filter.
Otherwise the evaporator will catch dust and affect unit’s performance.
• Do not dry the air filter with fire or electric hair dryer. Otherwise the air filter may be unshaped or caught on fire.
• Don’t use dust catcher or brush to clean the air filter. Otherwise the air filter may be destroyed.
Check Before Use-season
• Check whether air outlet is blocked.
• Check whether power plug and power socket are in good condition.
• Check whether air filter is clean.
• Check whether drain hose is damaged.
Care After Use-season
• Disconnect power.
• Clean air filter and case.
• Clean dust and obstacle of the dehumidifier.
• Empty the water bucket.
Long-time Storage
If you won’t use the dehumidifier for a long time, we suggest that you follow the steps below in order to maintain the unit in good condition.
• Make sure the bucket is clear of water and drain hose is removed.
• Clean the unit and wrap it well to prevent the gathering of dust.
• Bundle the tieline at the rear case. Use the tieline to collect the power cord, if there is a clasp in the groove, put the power plug into the clasp (As shown in fig. a). If there is no clasp in the groove, use the tieline to collect the power cord and the power plug doesn’t need to be fixed by the clasp (As shown in fig. b).
